laywerrobot/lib/python3.6/site-packages/tensorflow/python/keras/applications/mobilenet.py

# Copyright 2015 The TensorFlow Authors. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ==============================================================================
# pylint: disable=invalid-name
# pylint: disable=unused-import
"""MobileNet v1 models for Keras.

MobileNet is a general architecture and can be used for multiple use cases.
Depending on the use case, it can use different input layer size and
different width factors. This allows different width models to reduce
the number of multiply-adds and thereby
reduce inference cost on mobile devices.

MobileNets support any input size greater than 32 x 32, with larger image sizes
offering better performance.
The number of parameters and number of multiply-adds
can be modified by using the `alpha` parameter,
which increases/decreases the number of filters in each layer.
By altering the image size and `alpha` parameter,
all 16 models from the paper can be built, with ImageNet weights provided.

The paper demonstrates the performance of MobileNets using `alpha` values of
1.0 (also called 100 % MobileNet), 0.75, 0.5 and 0.25.
For each of these `alpha` values, weights for 4 different input image sizes
are provided (224, 192, 160, 128).

The following table describes the size and accuracy of the 100% MobileNet
on size 224 x 224:
----------------------------------------------------------------------------
Width Multiplier (alpha) | ImageNet Acc |  Multiply-Adds (M) |  Params (M)
----------------------------------------------------------------------------
|   1.0 MobileNet-224    |    70.6 %     |        529        |     4.2     |
|   0.75 MobileNet-224   |    68.4 %     |        325        |     2.6     |
|   0.50 MobileNet-224   |    63.7 %     |        149        |     1.3     |
|   0.25 MobileNet-224   |    50.6 %     |        41         |     0.5     |
----------------------------------------------------------------------------

The following table describes the performance of
the 100 % MobileNet on various input sizes:
------------------------------------------------------------------------
      Resolution      | ImageNet Acc | Multiply-Adds (M) | Params (M)
------------------------------------------------------------------------
|  1.0 MobileNet-224  |    70.6 %    |        529        |     4.2     |
|  1.0 MobileNet-192  |    69.1 %    |        529        |     4.2     |
|  1.0 MobileNet-160  |    67.2 %    |        529        |     4.2     |
|  1.0 MobileNet-128  |    64.4 %    |        529        |     4.2     |
------------------------------------------------------------------------

The weights for all 16 models are obtained and translated
from TensorFlow checkpoints found at
https://github.com/tensorflow/models/blob/master/research/slim/nets/mobilenet_v1.md

# Reference
- [MobileNets: Efficient Convolutional Neural Networks for
   Mobile Vision Applications](https://arxiv.org/pdf/1704.04861.pdf))
"""
from __future__ import absolute_import
from __future__ import division
from __future__ import print_function

import os

from tensorflow.python.keras import backend as K
from tensorflow.python.keras.applications import imagenet_utils
from tensorflow.python.keras.applications.imagenet_utils import _obtain_input_shape
from tensorflow.python.keras.applications.imagenet_utils import decode_predictions
from tensorflow.python.keras.layers import Activation
from tensorflow.python.keras.layers import BatchNormalization
from tensorflow.python.keras.layers import Conv2D
from tensorflow.python.keras.layers import DepthwiseConv2D
from tensorflow.python.keras.layers import Dropout
from tensorflow.python.keras.layers import GlobalAveragePooling2D
from tensorflow.python.keras.layers import GlobalMaxPooling2D
from tensorflow.python.keras.layers import Input
from tensorflow.python.keras.layers import ReLU
from tensorflow.python.keras.layers import Reshape
from tensorflow.python.keras.layers import ZeroPadding2D
from tensorflow.python.keras.models import Model
from tensorflow.python.keras.utils import layer_utils
from tensorflow.python.keras.utils.data_utils import get_file
from tensorflow.python.platform import tf_logging as logging
from tensorflow.python.util.tf_export import tf_export


BASE_WEIGHT_PATH = 'https://github.com/fchollet/deep-learning-models/releases/download/v0.6/'


@tf_export('keras.applications.mobilenet.preprocess_input')
def preprocess_input(x):
  """Preprocesses a numpy array encoding a batch of images.

  Arguments:
      x: a 4D numpy array consists of RGB values within [0, 255].

  Returns:
      Preprocessed array.
  """
  return imagenet_utils.preprocess_input(x, mode='tf')


@tf_export('keras.applications.MobileNet',
           'keras.applications.mobilenet.MobileNet')
def MobileNet(input_shape=None,
              alpha=1.0,
              depth_multiplier=1,
              dropout=1e-3,
              include_top=True,
              weights='imagenet',
              input_tensor=None,
              pooling=None,
              classes=1000):
  """Instantiates the MobileNet architecture.

  Arguments:
      input_shape: optional shape tuple, only to be specified
          if `include_top` is False (otherwise the input shape
          has to be `(224, 224, 3)` (with `channels_last` data format)
          or (3, 224, 224) (with `channels_first` data format).
          It should have exactly 3 inputs channels,
          and width and height should be no smaller than 32.
          E.g. `(200, 200, 3)` would be one valid value.
      alpha: controls the width of the network.
          - If `alpha` < 1.0, proportionally decreases the number
              of filters in each layer.
          - If `alpha` > 1.0, proportionally increases the number
              of filters in each layer.
          - If `alpha` = 1, default number of filters from the paper
               are used at each layer.
      depth_multiplier: depth multiplier for depthwise convolution
          (also called the resolution multiplier)
      dropout: dropout rate
      include_top: whether to include the fully-connected
          layer at the top of the network.
      weights: one of `None` (random initialization),
            'imagenet' (pre-training on ImageNet),
            or the path to the weights file to be loaded.
      input_tensor: optional Keras tensor (i.e. output of
          `layers.Input()`)
          to use as image input for the model.
      pooling: Optional pooling mode for feature extraction
          when `include_top` is `False`.
          - `None` means that the output of the model
              will be the 4D tensor output of the
              last convolutional layer.
          - `avg` means that global average pooling
              will be applied to the output of the
              last convolutional layer, and thus
              the output of the model will be a
              2D tensor.
          - `max` means that global max pooling will
              be applied.
      classes: optional number of classes to classify images
          into, only to be specified if `include_top` is True, and
          if no `weights` argument is specified.

  Returns:
      A Keras model instance.

  Raises:
      ValueError: in case of invalid argument for `weights`,
          or invalid input shape.
      RuntimeError: If attempting to run this model with a
          backend that does not support separable convolutions.
  """

  if not (weights in {'imagenet', None} or os.path.exists(weights)):
    raise ValueError('The `weights` argument should be either '
                     '`None` (random initialization), `imagenet` '
                     '(pre-training on ImageNet), '
                     'or the path to the weights file to be loaded.')

  if weights == 'imagenet' and include_top and classes != 1000:
    raise ValueError('If using `weights` as ImageNet with `include_top` '
                     'as true, `classes` should be 1000')

  # Determine proper input shape and default size.
  if input_shape is None:
    default_size = 224
  else:
    if K.image_data_format() == 'channels_first':
      rows = input_shape[1]
      cols = input_shape[2]
    else:
      rows = input_shape[0]
      cols = input_shape[1]

    if rows == cols and rows in [128, 160, 192, 224]:
      default_size = rows
    else:
      default_size = 224

  input_shape = _obtain_input_shape(
      input_shape,
      default_size=default_size,
      min_size=32,
      data_format=K.image_data_format(),
      require_flatten=include_top,
      weights=weights)

  if K.image_data_format() == 'channels_last':
    row_axis, col_axis = (0, 1)
  else:
    row_axis, col_axis = (1, 2)
  rows = input_shape[row_axis]
  cols = input_shape[col_axis]

  if weights == 'imagenet':
    if depth_multiplier != 1:
      raise ValueError('If imagenet weights are being loaded, '
                       'depth multiplier must be 1')

    if alpha not in [0.25, 0.50, 0.75, 1.0]:
      raise ValueError('If imagenet weights are being loaded, '
                       'alpha can be one of'
                       '`0.25`, `0.50`, `0.75` or `1.0` only.')

    if rows != cols or rows not in [128, 160, 192, 224]:
      if rows is None:
        rows = 224
        logging.warning('MobileNet shape is undefined.'
                        ' Weights for input shape (224, 224) will be loaded.')
      else:
        raise ValueError('If imagenet weights are being loaded, '
                         'input must have a static square shape (one of '
                         '(128, 128), (160, 160), (192, 192), or (224, 224)).'
                         ' Input shape provided = %s' % (input_shape,))

  if K.image_data_format() != 'channels_last':
    logging.warning('The MobileNet family of models is only available '
                    'for the input data format "channels_last" '
                    '(width, height, channels). '
                    'However your settings specify the default '
                    'data format "channels_first" (channels, width, height).'
                    ' You should set `image_data_format="channels_last"` '
                    'in your Keras config located at ~/.keras/keras.json. '
                    'The model being returned right now will expect inputs '
                    'to follow the "channels_last" data format.')
    K.set_image_data_format('channels_last')
    old_data_format = 'channels_first'
  else:
    old_data_format = None

  if input_tensor is None:
    img_input = Input(shape=input_shape)
  else:
    if not K.is_keras_tensor(input_tensor):
      img_input = Input(tensor=input_tensor, shape=input_shape)
    else:
      img_input = input_tensor

  x = _conv_block(img_input, 32, alpha, strides=(2, 2))
  x = _depthwise_conv_block(x, 64, alpha, depth_multiplier, block_id=1)

  x = _depthwise_conv_block(
      x, 128, alpha, depth_multiplier, strides=(2, 2), block_id=2)
  x = _depthwise_conv_block(x, 128, alpha, depth_multiplier, block_id=3)

  x = _depthwise_conv_block(
      x, 256, alpha, depth_multiplier, strides=(2, 2), block_id=4)
  x = _depthwise_conv_block(x, 256, alpha, depth_multiplier, block_id=5)

  x = _depthwise_conv_block(
      x, 512, alpha, depth_multiplier, strides=(2, 2), block_id=6)
  x = _depthwise_conv_block(x, 512, alpha, depth_multiplier, block_id=7)
  x = _depthwise_conv_block(x, 512, alpha, depth_multiplier, block_id=8)
  x = _depthwise_conv_block(x, 512, alpha, depth_multiplier, block_id=9)
  x = _depthwise_conv_block(x, 512, alpha, depth_multiplier, block_id=10)
  x = _depthwise_conv_block(x, 512, alpha, depth_multiplier, block_id=11)

  x = _depthwise_conv_block(
      x, 1024, alpha, depth_multiplier, strides=(2, 2), block_id=12)
  x = _depthwise_conv_block(x, 1024, alpha, depth_multiplier, block_id=13)

  if include_top:
    if K.image_data_format() == 'channels_first':
      shape = (int(1024 * alpha), 1, 1)
    else:
      shape = (1, 1, int(1024 * alpha))

    x = GlobalAveragePooling2D()(x)
    x = Reshape(shape, name='reshape_1')(x)
    x = Dropout(dropout, name='dropout')(x)
    x = Conv2D(classes, (1, 1), padding='same', name='conv_preds')(x)
    x = Activation('softmax', name='act_softmax')(x)
    x = Reshape((classes,), name='reshape_2')(x)
  else:
    if pooling == 'avg':
      x = GlobalAveragePooling2D()(x)
    elif pooling == 'max':
      x = GlobalMaxPooling2D()(x)

  # Ensure that the model takes into account
  # any potential predecessors of `input_tensor`.
  if input_tensor is not None:
    inputs = layer_utils.get_source_inputs(input_tensor)
  else:
    inputs = img_input

  # Create model.
  model = Model(inputs, x, name='mobilenet_%0.2f_%s' % (alpha, rows))

  # load weights
  if weights == 'imagenet':
    if K.image_data_format() == 'channels_first':
      raise ValueError('Weights for "channels_first" format '
                       'are not available.')
    if alpha == 1.0:
      alpha_text = '1_0'
    elif alpha == 0.75:
      alpha_text = '7_5'
    elif alpha == 0.50:
      alpha_text = '5_0'
    else:
      alpha_text = '2_5'

    if include_top:
      model_name = 'mobilenet_%s_%d_tf.h5' % (alpha_text, rows)
      weigh_path = BASE_WEIGHT_PATH + model_name
      weights_path = get_file(model_name, weigh_path, cache_subdir='models')
    else:
      model_name = 'mobilenet_%s_%d_tf_no_top.h5' % (alpha_text, rows)
      weigh_path = BASE_WEIGHT_PATH + model_name
      weights_path = get_file(model_name, weigh_path, cache_subdir='models')
    model.load_weights(weights_path)
  elif weights is not None:
    model.load_weights(weights)

  if old_data_format:
    K.set_image_data_format(old_data_format)
  return model


def _conv_block(inputs, filters, alpha, kernel=(3, 3), strides=(1, 1)):
  """Adds an initial convolution layer (with batch normalization and relu6).

  Arguments:
      inputs: Input tensor of shape `(rows, cols, 3)`
          (with `channels_last` data format) or
          (3, rows, cols) (with `channels_first` data format).
          It should have exactly 3 inputs channels,
          and width and height should be no smaller than 32.
          E.g. `(224, 224, 3)` would be one valid value.
      filters: Integer, the dimensionality of the output space
          (i.e. the number of output filters in the convolution).
      alpha: controls the width of the network.
          - If `alpha` < 1.0, proportionally decreases the number
              of filters in each layer.
          - If `alpha` > 1.0, proportionally increases the number
              of filters in each layer.
          - If `alpha` = 1, default number of filters from the paper
               are used at each layer.
      kernel: An integer or tuple/list of 2 integers, specifying the
          width and height of the 2D convolution window.
          Can be a single integer to specify the same value for
          all spatial dimensions.
      strides: An integer or tuple/list of 2 integers,
          specifying the strides of the convolution along the width and height.
          Can be a single integer to specify the same value for
          all spatial dimensions.
          Specifying any stride value != 1 is incompatible with specifying
          any `dilation_rate` value != 1.

  Input shape:
      4D tensor with shape:
      `(samples, channels, rows, cols)` if data_format='channels_first'
      or 4D tensor with shape:
      `(samples, rows, cols, channels)` if data_format='channels_last'.

  Output shape:
      4D tensor with shape:
      `(samples, filters, new_rows, new_cols)` if data_format='channels_first'
      or 4D tensor with shape:
      `(samples, new_rows, new_cols, filters)` if data_format='channels_last'.
      `rows` and `cols` values might have changed due to stride.

  Returns:
      Output tensor of block.
  """
  channel_axis = 1 if K.image_data_format() == 'channels_first' else -1
  filters = int(filters * alpha)
  x = ZeroPadding2D(padding=(1, 1), name='conv1_pad')(inputs)
  x = Conv2D(
      filters,
      kernel,
      padding='valid',
      use_bias=False,
      strides=strides,
      name='conv1')(x)
  x = BatchNormalization(axis=channel_axis, name='conv1_bn')(x)
  return ReLU(6, name='conv1_relu')(x)


def _depthwise_conv_block(inputs,
                          pointwise_conv_filters,
                          alpha,
                          depth_multiplier=1,
                          strides=(1, 1),
                          block_id=1):
  """Adds a depthwise convolution block.

  A depthwise convolution block consists of a depthwise conv,
  batch normalization, relu6, pointwise convolution,
  batch normalization and relu6 activation.

  Arguments:
      inputs: Input tensor of shape `(rows, cols, channels)`
          (with `channels_last` data format) or
          (channels, rows, cols) (with `channels_first` data format).
      pointwise_conv_filters: Integer, the dimensionality of the output space
          (i.e. the number of output filters in the pointwise convolution).
      alpha: controls the width of the network.
          - If `alpha` < 1.0, proportionally decreases the number
              of filters in each layer.
          - If `alpha` > 1.0, proportionally increases the number
              of filters in each layer.
          - If `alpha` = 1, default number of filters from the paper
               are used at each layer.
      depth_multiplier: The number of depthwise convolution output channels
          for each input channel.
          The total number of depthwise convolution output
          channels will be equal to `filters_in * depth_multiplier`.
      strides: An integer or tuple/list of 2 integers,
          specifying the strides of the convolution along the width and height.
          Can be a single integer to specify the same value for
          all spatial dimensions.
          Specifying any stride value != 1 is incompatible with specifying
          any `dilation_rate` value != 1.
      block_id: Integer, a unique identification designating the block number.

  Input shape:
      4D tensor with shape:
      `(batch, channels, rows, cols)` if data_format='channels_first'
      or 4D tensor with shape:
      `(batch, rows, cols, channels)` if data_format='channels_last'.

  Output shape:
      4D tensor with shape:
      `(batch, filters, new_rows, new_cols)` if data_format='channels_first'
      or 4D tensor with shape:
      `(batch, new_rows, new_cols, filters)` if data_format='channels_last'.
      `rows` and `cols` values might have changed due to stride.

  Returns:
      Output tensor of block.
  """
  channel_axis = 1 if K.image_data_format() == 'channels_first' else -1
  pointwise_conv_filters = int(pointwise_conv_filters * alpha)
  x = ZeroPadding2D(padding=(1, 1), name='conv_pad_%d' % block_id)(inputs)
  x = DepthwiseConv2D(  # pylint: disable=not-callable
      (3, 3),
      padding='valid',
      depth_multiplier=depth_multiplier,
      strides=strides,
      use_bias=False,
      name='conv_dw_%d' % block_id)(x)
  x = BatchNormalization(axis=channel_axis, name='conv_dw_%d_bn' % block_id)(x)
  x = ReLU(6, name='conv_dw_%d_relu' % block_id)(x)

  x = Conv2D(
      pointwise_conv_filters, (1, 1),
      padding='same',
      use_bias=False,
      strides=(1, 1),
      name='conv_pw_%d' % block_id)(
          x)
  x = BatchNormalization(axis=channel_axis, name='conv_pw_%d_bn' % block_id)(x)
  return ReLU(6, name='conv_pw_%d_relu' % block_id)(x)