diff --git a/README.md b/README.md index 6b4dbcc..7d89212 100644 --- a/README.md +++ b/README.md @@ -11,6 +11,8 @@ * [Installing the KaosCube Interface](#installing-the-kaoscube-interface) 3. [Setting up functions of the KCInterface manually](#setting-up-functions-of-the-kcinterface-manually) * [Setting up the Hidden Service](#setting-up-the-hidden-service) +4. [Features](#features) + * [Installing 12d1:1f01 Huawei E353/E3131 LTE Usb Modem](#installing-12d1:1f01-huawei-e353/e3131-lte-usb-modem) # Hardware @@ -48,6 +50,10 @@ First step is to partition the MicroSD Get a buster image from https://www.armbian.com/download/ for the orange pi zero, as sshd is still running by default on the resulting machine +And, more importantly, as of my writing, the xradio does not work with Bullseye and Bookworm. +Which means, the small on board wifi does not work. + + Now copy binarywise the image to the partition sudo dd bs=4M if=ArmbianBusterForOrangePiZero.img of=/dev/sdb @@ -154,6 +160,11 @@ Then run again the update and upgrade. ## Setting up the Access Point +After upgrading to the latest debian bullseye, I needed to install dnsmasq for the interface wlan0 to work: + + apt install dnsmasq + +After that, the ap could be set up with the commands: nmcli con add type wifi ifname wlan0 mode ap con-name kaoscube ssid KaosCube ipv4.method shared nmcli con modify kaoscube wifi-sec.key-mgmt wpa-psk @@ -291,4 +302,27 @@ your hidden service is running, and you can get its address under /var/lib/tor/hidden_service/ , or whatever name or path you wrote in the torrc. +# Features + +## Installing 12d1:1f01 Huawei E353/E3131 LTE Usb Modem + + +First issue + + lsusb + +to check, if you are trying to install the right LTE usb dongle. + + + +Then, install usb_modeswitch with the command + + sudo apt install usb-modeswitch usb-modeswitch-data + + +and then switch to modem mode for the usb stick + + sudo usb_modeswitch -v 12d1 -p 1f01 -M '55534243123456780000000000000a11062000000000000100000000000000' + +